interesting..wonder if repeated applications of the steam would break it down

On Sat, Dec 6, 2014 at 7:52 PM, Hector Castillo <hectorcastillo@comcast.net> wrote:
I can't anythin
Hector


Sent from my Verizon Wireless 4G LTE smartphone


-------- Original message --------
From: Randy Frye
Date:12/06/2014 4:26 PM (GMT-08:00)
Subject: Re: Steam cleaning

Hey Fred I did a real fast example per your request and sent it over the forum on three different videos. Hope that helps some.


On Dec 6, 2014, at 10:24 AM, Fred Hueston <fhueston@gmail.com> wrote:

Randy


Since you have the steam machine can you try the following experiment and report  back to us. Take a marble tile and seal it. Let it cure for several days. Once cured steam clean it they way you would normally. Than take some water and place it on the tile and see if it will soak in. .Time it. This should answer this question.  Or if anyone else wants to try it and let us know

On Sat, Dec 6, 2014 at 8:29 AM, Randy Frye <rfrye6@gmail.com> wrote:
Hi Stephen:

I say this with much respect to Fred. I do mention to my clients the jury is still out on this. 

The only reason I suggest it wouldn't weaken the sealer is being in the carpet cleaning business for twenty years. We use steam irons on different stains and for the acceleration of bleaches. Steam in these cases where you leave on top a terry cloth towel for 15 to 30 seconds at a time is still very slow to remove, re-liquify things for removal. In the case of these cheap steam mops they buy at a store sliding them over the marble surface at 1 mph I really don’t think it would weaken the sealer. I own a Swedish steamer that cost $800.00 and found it was slower in removal of stains than a steam iron. 
Just my experience.

Randy, CEI Surface Pros


 
On Dec 6, 2014, at 7:56 AM, Fred Hueston <fhueston@gmail.com> wrote:

Steam has a temperature of 212 F which is close to the melting point of some fluroalphatics..so I would not recommend it.

On Sat, Dec 6, 2014 at 7:46 AM, cpstaples <cpstaples@msn.com> wrote:
what type of sealer are you asking about? a topical coating or a penetrating sealer?


Sent on a Sprint Samsung Galaxy S® 5


-------- Original message --------
From: Randy Frye
Date:12/06/2014 7:31 AM (GMT-05:00)
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: Steam cleaning

Most of our clients use those without a problem. I personally think that they wouldn’t harm the sealer.

 
> On Dec 6, 2014, at 2:42 AM, Stephen Webb <stephen@newlifemarblerestoration.com> wrote:
>
> Hey All, What effect would steam cleaning natural stone floors have? would it remove sealer? I'm asked that often. Aloha
> Stephen
>
> ---
> This email is free from viruses and malware because avast! Antivirus protection is active.
> http://www.avast.com
 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com




--
Frederick M. Hueston PhD
www.stoneforensics.com
office             321 514 6845      
See my specialty products at  www.godrfred.com