61 Eucalypt way. Cootharaba QLD. 4565. Australia.   

So it seems that because if the much higher cost and shipping it would be better to save it for more difficult stones, and countertops. Otherwise I will just keep honing to a higher degree and use this Tenax 5x. 

Sent from my iPhone

On 21 Jan 2015, at 12:53 am, cpstaples <cpstaples@msn.com> wrote:

Classic marble 204 sussex blvd broomall pa 19008


Sent on a Sprint Samsung Galaxy S® 5


-------- Original message --------
From: stuart rosen
Date:01/20/2015 8:11 AM (GMT-05:00)
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: countertops/vanities pricing

Sure-just sent you an email to make sure shipping address is correct.

On Tue, Jan 20, 2015 at 7:39 AM, cpstaples <cpstaples@msn.com> wrote:
can you send me down a sample. Thank you Carl


Sent on a Sprint Samsung Galaxy S® 5


-------- Original message --------
From: Stu Rosen
Date:01/20/2015 7:11 AM (GMT-05:00)
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: countertops/vanities pricing

5x and the m3 mpg are good products.
MB 12 isn't for everyone as it has a learning curve which can be frustrating on floors especially if you run a standard machine.
On countertops once learned it works great with a makita.
Polish faster and cleaner.
Am happy to send anyone a sample and explain the use.


Sent from my iPhone

On Jan 20, 2015, at 2:04 AM, cpstaples <cpstaples@msn.com> wrote:

not putting down any of Stu's products because I have not used them, but we only use 5x and the liquid polish from M3 which I believe is 5x with something added to it to help reduce etching. 


Sent on a Sprint Samsung Galaxy S® 5


-------- Original message --------
From: Mike Marsoun
Date:01/20/2015 1:38 AM (GMT-05:00)
To: sccpartners@stoneandtilepros.simplelists.com
Subject: RE: countertops/vanities pricing

Hi Stu,  just remembered this as I have to re order polishing powder. I get the Tenax 5x for $15 per kg.

Only MB I have seen here is MB11 for $68 per 180 grams. That’s crazy. I know MB 12 is a better product, but unless a TSP replaces several ounces of the 5x then it is a losing proposition. Shipping is crazy, so now I am remembering how I ended up here…stuck with the 5x and just making it work.

 

 

From: list-manager@stoneandtilepros.simplelists.com [mailto:list-manager@stoneandtilepros.simplelists.com] On Behalf Of stuart rosen
Sent: Tuesday, 9 December 2014 7:59 AM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: countertops/vanities pricing

 

Mike

Give me your address I will send some MB12 for you to try.

Goes well with a couple of pieces of dull stone and a cold Fosters Lager 

I think you will have some fun with it.

 

 

On Mon, Dec 8, 2014 at 4:44 PM, Mike Marsoun <nulifesc@bigpond.com> wrote:

Thanks stu. I'll get some mb12. I find that a 400 Genisis gets everything usually and easier to transition to resins. The only reason I hone so high is because of the 5x being more difficult to pop a shine at 800. Hard to find good products here and super expensive. My go-to is the Tenax 5x because it is easily available and cheap. 

Sent from my iPhone


On 9 Dec 2014, at 2:14 am, stuart rosen <mail@stoneshine.com> wrote:

I hate to see anyone lower their pricing but if you get $1200 for a sixty sq ft kitchen you could lower your rate some.

Seems like you do a lot of steps-just curious why do you skip the 220 grit?

You could  use a faster process-start with a 220 genesis where there is etched or worn areas.

You could go right to 220 resin or in some cases 400 resin then go to 800 and polish with a dry polishing powder. Why waste all that time using 5x on a countertop if you don't have to. In most cases a product like MB12 will give you great results quickly. 

 

On Sat, Dec 6, 2014 at 2:02 AM, Mike Marsoun <nulifesc@bigpond.com> wrote:

What do you guys charge for countertops? I have been at $200m2 ($20sf) for a long time, seems to work but I have a large commercial job I am bidding and was wondering how low I could go.  Usually I go 400 genisis (electroplated) dry, then 120r, 400r, 800r 1800r, then5x. I will stop ar 800r sometimes but I rather do a quick pass with the diamonds than have to go hard with the powder.

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com
 




--

Regards,
Stu Rosen
201-446-1200

"EVERYTHING MATTERS"

 

 

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com
 
 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com
 




--

Regards,
Stu Rosen
201-446-1200

"EVERYTHING MATTERS"

 

 

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com
 
 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com




--
Regards,
Stu Rosen
201-446-1200
"EVERYTHING MATTERS"


 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com