Oh Ok for some reason I thought it was a liquid application.
That sounds good for commercial jobs.

On Mon, Jun 29, 2015 at 9:06 PM, Mike M <nulifesc@bigpond.com> wrote:
No, if damaged it is replaced or you could seam in an area…not easily damaged tho. It has a melting point of 150C, and it can be sliced by a razor, so the owners need to treat it like formica, hot pads and cutting boards. One of the best things about is that it can be used for restoration as well, the acrylic adhesives make most of the etch marks disappear, only super deep etches need a quick hit with a dry 120 resin pad because the texture could show the otherwise. This skin also allows the stone to breathe. The market for application in the US is $18-22 sf. to apply, so it is a lot cheaper than the resin coatings, and better for hospitality use, the room will not smell like a surfboard factory for an entire day. It is also a one day operation, no cure time, you can do every job in a single visit. 


On 30 Jun 2015, at 7:12 am, Mike Marsoun <nulifesc@bigpond.com> wrote:

I'm working on a film now. The gloss is ready, other finishes are coming. Have a really nice semi gloss but it needs tweaking, and a matte. These have the hardest finish in the industry and are anti microbial. The tuff-skin was created by accident and is good but they will not warrantee the anti- microbial. Mine has a much harder finish too. Crystalcote.net.au  

Sent from my iPhone

On 30 Jun 2015, at 12:41 am, stuart rosen <mail@stoneshine.com> wrote:

Hector-you can google up films-I think tuff skin was one-

On Mon, Jun 29, 2015 at 8:58 AM, Hector Castillo <hectorcastillo@comcast.net> wrote:
Hi stu
who sell that FILM for marble counter tops



Sent from my Verizon Wireless 4G LTE smartphone


-------- Original message --------
From: stuart rosen <mail@stoneshine.com>
Date: 06/27/2015 7:15 AM (GMT-08:00)
To: sccpartners@stoneandtilepros.simplelists.com
Subject: CLEARSTONE COATING BAR REPAIR

This is a bartop we did almost three years ago-we produced a high honed finish not a high polish.
This damaged area is where all the drinks get served.
There were cracks in the surface from beer bottles and bottles of wine being placed down hard.
The pics show the prep, the primer and the poured coating.
The final pics are the repair blended in.
Not bad for a coating on a limestone bartop that gets a lot of traffic.

--
Regards,
Stu Rosen
201-446-1200

"EVERYTHING MATTERS"


 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com




--
Regards,
Stu Rosen
201-446-1200

"EVERYTHING MATTERS"


 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com


 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com




--
Regards,
Stu Rosen
201-446-1200

"EVERYTHING MATTERS"