When honing if the inlays are installed flat with the rest of the stone you can clean the granite inlays with acetone, then use a good quality clean packing tape and place over the inlay and cut the tape off around the grout line press down to make sure you have a good adhesive bond. Then hone over the tape. If the stone and the inlay are flat you should not have a problem. If the inlay is not flat then you need to hone around the inlay. When polishing polish over the inlay and you will not harm the granite inlay.

John E Freitag

John E Freitag

Owner/Director

The Stone & Tile School

Office 407-567-7680

Cell 407-615-0134

www.thestoneandtileschool.com

From: list-manager@stoneandtilepros.simplelists.com [mailto:list-manager@stoneandtilepros.simplelists.com] On Behalf Of Felipe Garcia
Sent: Thursday, October 01, 2015 5:49 PM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: Marble floor granite apli cations

Thank you all.
I gest can't get away from doing my grinding by hand around the cabinets and ........
Never mind got it. ....thank you again.

Visit list archives, subscribe, unsubscribe or change your subscription 

preferences:

http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread): 

sccpartners@stoneandtilepros.simplelists.com