Good for you-While in some cases taping is important, we found working around the inserts is more efficient .So besides running a 17 inch machine.The $1200 bucks or so you pay for an 11-13 inch machine will pay for itself many times over.Not to mention the speed in honing countertops and using in small bathrooms and such.When doing estimates always check - Lippage, grout type, quality of installation(hollow spots, cracks, loose tiles) and presence ofCoatings.Have a estimate sheet that lists all the items you need to check.On Thu, Oct 1, 2015 at 8:40 PM, Felipe Garcia <felipe@protechstoneandtilecare.com> wrote:That's what I ended up doing.
Well I have learned a lesson today.
My second mistake was that I have never inspect the grout. ! Was sander !
AND STAR falling apart but I bet you all this will never happen again.
Thank you all for your feedbackFelipe Garcia Candia.
Pro tech stone and tile care.On Thu, Oct 1, 2015, 7:09 PM John Freitag <jfreitag@thestoneandtileschool.com> wrote:When honing if the inlays are installed flat with the rest of the stone you can clean the granite inlays with acetone, then use a good quality clean packing tape and place over the inlay and cut the tape off around the grout line press down to make sure you have a good adhesive bond. Then hone over the tape. If the stone and the inlay are flat you should not have a problem. If the inlay is not flat then you need to hone around the inlay. When polishing polish over the inlay and you will not harm the granite inlay.
John E Freitag
John E Freitag
Owner/Director
The Stone & Tile School
Office 407-567-7680
Cell 407-615-0134
<image001.jpg>
From: list-manager@stoneandtilepros.simplelists.com [mailto:list-manager@stoneandtilepros.simplelists.com] On Behalf Of Felipe Garcia
Sent: Thursday, October 01, 2015 5:49 PM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: Marble floor granite apli cations
Thank you all.
I gest can't get away from doing my grinding by hand around the cabinets and ........
Never mind got it. ....thank you again.
On Thu, Oct 1, 2015, 4:37 PM Randy Frye <rfrye@comcast.net> wrote:
Fred used to say treat area as if where all granite.
Best Regards,Randy Frye, CEI Surface Pros
239-253-1991
On Oct 1, 2015, at 4:07 PM, Felipe Garcia <felipe@protechstoneandtilecare.com> wrote:Hey guys need help desperately
I'm polishing this white Carrera marble and have this 2×2 black granite in laid I have tried tape the squares whit red tape and impossible get good polishing on marble trying to go around, best advice to do right?Visit list archives, subscribe, unsubscribe or change your subscriptionpreferences:http://stoneandtilepros.simplelists.com/sccpartnersStart a new conversation (thread):sccpartners@stoneandtilepros.simplelists.comVisit list archives, subscribe, unsubscribe or change your subscriptionpreferences:http://stoneandtilepros.simplelists.com/sccpartnersStart a new conversation (thread):sccpartners@stoneandtilepros.simplelists.comVisit list archives, subscribe, unsubscribe or change your subscriptionpreferences:http://stoneandtilepros.simplelists.com/sccpartnersStart a new conversation (thread):sccpartners@stoneandtilepros.simplelists.comVisit list archives, subscribe, unsubscribe or change your subscription preferences: http://stoneandtilepros.simplelists.com/sccpartners Start a new conversation (thread): sccpartners@stoneandtilepros.simplelists.comVisit list archives, subscribe, unsubscribe or change your subscription preferences: http://stoneandtilepros.simplelists.com/sccpartners Start a new conversation (thread): sccpartners@stoneandtilepros.simplelists.com
--Regards,
Stu Rosen
201-446-1200"EVERYTHING MATTERS"Visit list archives, subscribe, unsubscribe or change your subscription preferences: http://stoneandtilepros.simplelists.com/sccpartners Start a new conversation (thread): sccpartners@stoneandtilepros.simplelists.com