That's what great about the trizact-you use a small amount of water-the other abrasive need to be dust controlled.
When we run the trizacts we don't even really need the vacs.
We have festools with hepa vacs as we do a few clearstone jobs each month-
If you run trizacts you need a orbital grinder that is at least 10,000 rpm's and has a 3mm sanding stroke..


On Tue, Oct 27, 2015 at 8:58 AM, Baird Standish <bairdstandish@gmail.com> wrote:
Stu, do you run these wet or dry? If dry, how are you dealing with dust?  Can you run these in a vibrating Palm sander vs. an angle grinder?
B


________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
15 West Highland Ave. Suite E
Philadelphia, PA 19118
Phone: 215-732-7505
Fax: 215-546-9160

On Oct 27, 2015, at 8:54 AM, stuart rosen <mail@stoneshine.com> wrote:

RS Hughes is a national distributor of 3M: www.rshughes.com
We use the following grits
60 grit (3m doesn't call them grit)
100 grit
A35
A10
A5
cerium oxide pads-creates a great polish on hard surface materials if you have to go that high.


On Tue, Oct 27, 2015 at 7:49 AM, Baird Standish <bairdstandish@gmail.com> wrote:
Stu, where is a good place to order trizact and scotch brite pads? I have a quartzite counter that I want to bring up to a satin finish. 
B


________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
15 West Highland Ave. Suite E
Philadelphia, PA 19118
Phone: 215-732-7505
Fax: 215-546-9160

On Oct 26, 2015, at 7:11 PM, stuart rosen <mail@stoneshine.com> wrote:

Hector
We use trizact pads from 3m but you can use festool or sia sandpapers as well.
They are expensive but work wonders on this stuff.
I would try and clean the crack-grind it with with 100 grit trizact and then fill and sand with a higher grit.
Finish with a maroon or silver 3m scotch brite pad for honed or high honed.

On Mon, Oct 26, 2015 at 2:33 PM, <hectorcastillo@comcast.net> wrote:
Hello partners
i have a crack to fix in a counter top.
its g223r maul quartz.  Hi-MACS.
i got the glue for a match in color from intergra adhesives usa.
what is the best way to fix this crack.
how do i best re polish this counter top?
i have not seen it so i need options for finish's .
here are the photos of the counter top sample name.
who works with this type of counter tops?
Hector Castillo 
805-739-0169

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com



--
Regards,
Stu Rosen
201-446-1200

"EVERYTHING MATTERS"


 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com


 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com



--
Regards,
Stu Rosen
201-446-1200

"EVERYTHING MATTERS"


 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com


 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com



--
Regards,
Stu Rosen
201-446-1200

"EVERYTHING MATTERS"