Pat,

I've attached photos, I did a test area and was able to remove them. They vary in degrees over the entire floor. A few will require a 70 grit electroplate to remove and some no more than a 200 resin. I was just curious as to approach and what you guys would suggest. It looks like they will be removed by hand and I will use a 200 grit monkey pad and finish with the spinergys. Thanks for the input everyone.

Ron

On Thu, Dec 3, 2015 at 4:56 PM, Pat Staples <cpstaples@msn.com> wrote:
You need to do a test sample and see if the marks will come out then we can give you advice on how to fix.



Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5


-------- Original message --------
From: Mike M <nulifesc@bigpond.com>
Date: 12/03/2015 4:47 PM (GMT-05:00)
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: Packing marks

Id use a hand machine at 220 to remove the marks, then go over the entire floor with a #2 Cheetah, and your spinnergy pads to finish off. The #2 Cheetah pads alone probably won’t be aggressive enough.


On 4 Dec 2015, at 3:40 am, Ron Moore <rmoore@americanstonecare.com> wrote:

Pat,

It's in the marble family, soft and the marks are isolated to individual tiles dispersed over 7,000 SF. The floor is a new install so lippage is present.

Ron

On Dec 3, 2015 11:35 AM, "Pat Staples" <cpstaples@msn.com> wrote:
Can't tell from the picture but do the marks go from one tile to the next?



Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5


-------- Original message --------
From: Ron Moore <rmoore@americanstonecare.com>
Date: 12/03/2015 8:47 AM (GMT-05:00)
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Packing marks

Partners,

I'm in a tight spot with a contractor who is with holding payment on a 7,000 SF marble repair. The scope was remove all scratches, clean and re hone. This is complete however there are these "ghost" marks on the stone that I can only guess came from packing materials. I did a test area using a hand machine and starting with a 200 grit resin, it worked. Now my dilemma is they are ALL OVER this 7,000 sf. It is not feasible to do it all by hand. The lippage poses a problem. John Freitag, do you think the cheetah pucks would work? ? I'm going to attach a picture of the marks. Any advice would be welcome. Thanks in advance.

Ron Moore
American Stone Care, Inc.
Cell 301.602.2307

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

<20150915_120552.jpg><20150916_185238.jpg>

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com