I would be careful using your lower grit diamond on a floor machine, you might windup with picture framing around the lower edges of the tile. Then you would be stuck removing that problem



Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5


-------- Original message --------
From: Ron Moore <rmoore@americanstonecare.com>
Date: 12/03/2015 5:03 PM (GMT-05:00)
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: Packing marks

Pat,

I've attached photos, I did a test area and was able to remove them. They vary in degrees over the entire floor. A few will require a 70 grit electroplate to remove and some no more than a 200 resin. I was just curious as to approach and what you guys would suggest. It looks like they will be removed by hand and I will use a 200 grit monkey pad and finish with the spinergys. Thanks for the input everyone.

Ron

On Thu, Dec 3, 2015 at 4:56 PM, Pat Staples <cpstaples@msn.com> wrote:
You need to do a test sample and see if the marks will come out then we can give you advice on how to fix.



Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5


-------- Original message --------
From: Mike M <nulifesc@bigpond.com>
Date: 12/03/2015 4:47 PM (GMT-05:00)
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: Packing marks

Id use a hand machine at 220 to remove the marks, then go over the entire floor with a #2 Cheetah, and your spinnergy pads to finish off. The #2 Cheetah pads alone probably won’t be aggressive enough.


On 4 Dec 2015, at 3:40 am, Ron Moore <rmoore@americanstonecare.com> wrote:

Pat,

It's in the marble family, soft and the marks are isolated to individual tiles dispersed over 7,000 SF. The floor is a new install so lippage is present.

Ron

On Dec 3, 2015 11:35 AM, "Pat Staples" <cpstaples@msn.com> wrote:
Can't tell from the picture but do the marks go from one tile to the next?



Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5


-------- Original message --------
From: Ron Moore <rmoore@americanstonecare.com>
Date: 12/03/2015 8:47 AM (GMT-05:00)
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Packing marks

Partners,

I'm in a tight spot with a contractor who is with holding payment on a 7,000 SF marble repair. The scope was remove all scratches, clean and re hone. This is complete however there are these "ghost" marks on the stone that I can only guess came from packing materials. I did a test area using a hand machine and starting with a 200 grit resin, it worked. Now my dilemma is they are ALL OVER this 7,000 sf. It is not feasible to do it all by hand. The lippage poses a problem. John Freitag, do you think the cheetah pucks would work? ? I'm going to attach a picture of the marks. Any advice would be welcome. Thanks in advance.

Ron Moore
American Stone Care, Inc.
Cell 301.602.2307

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

<20150915_120552.jpg><20150916_185238.jpg>

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com


 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com