I would use the cheetah pad number two and maybe three and then polish with 5X
Happy Connecting. Sent from my Sprint Samsung Galaxy S® 5
-------- Original message --------
From: Tony Deluna <tndeluna@gmail.com>
Date: 04/13/2016 8:06 PM (GMT-05:00)
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: Marble
Sounds like you have two separate jobs here. The first job is stripping The wax off completely 100%
I find most Waterbase alkaline strippers take too long.
We do a heavy duty masking job then hit it with methylene chloride and then scrub it with the black pad and then scrub all the grout joints too at the same time. Then a hot Jet extraction.
I've never had problems dumping the slurry waste out here.
Then you can tell what steps you need to take with the marble polishing.
Most high shine polishing jobs we do we polish after 220 or 400. We hardly ever take it to 1800. And we get a crystal clear glassy shine using the green Dai-glo.
On a lot of marbles it'll just meltaway light scratches and scuffs.
But we always do a test for that because sometimes it just makes the scratches more obvious
We charge $3.50 a square foot for stripping and $3.50 a square foot for marble polishing single stage if we add diamond honey we had another dollar and call it a two-stage
Tony DeLuna
925-625-9625
www.PatriotStoneRestoration.com
> On Apr 13, 2016, at 1:57 PM, John Kunz (via sccpartners list) <nobody@simplelists.com> wrote:
>
> This email was sent from yahoo.com which does not allow forwarding of emails via email lists. Therefore the sender's email address (kunzj79@yahoo.com) has been replaced with a dummy one. The original message follows:
>
> I would agree don't cut corners or it will show in your work 220 to 1800 and polish.. And then for maintenance run polishing compound once a month
>
> Sent from my iPhone
>
>> On Apr 13, 2016, at 3:53 PM, Randy Frye <rfrye6@gmail.com> wrote:
>>
>> We always grind those jobs, then up to a polish
>>
>>> On Apr 13, 2016, at 2:43 PM, Micah <micahgautier@gmail.com> wrote:
>>>
>>> Hi partners I have a church ( pics attached) that has been waxing their marble, it's three years old but is in need or restoration, it's time. I'm curious if anyone has a quicker idea than 220,400 polish in this or if that the only option, also anyone with this type of experience that has put together a maintenance plan for something like this, they have about 2200 people a week
>>>
>>> Thank you
>>>
>>>
>>> Visit list archives, subscribe, unsubscribe or change your subscription
>>> preferences:
>>> http://stoneandtilepros.simplelists.com/sccpartners
>>>
>>> Start a new conversation (thread):
>>> sccpartners@stoneandtilepros.simplelists.com
>>>
>>> <image1.jpeg><image2.jpeg><image3.jpeg><image4.jpeg>
>>>
>>>
>>> Micah
>>
>>
>> Visit list archives, subscribe, unsubscribe or change your subscription
>> preferences:
>> http://stoneandtilepros.simplelists.com/sccpartners
>>
>> Start a new conversation (thread):
>> sccpartners@stoneandtilepros.simplelists.com
>
>
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://stoneandtilepros.simplelists.com/sccpartners
>
> Start a new conversation (thread):
> sccpartners@stoneandtilepros.simplelists.com
>
Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences: http://stoneandtilepros.simplelists.com/sccpartners Start a new conversation (thread): sccpartners@stoneandtilepros.simplelists.com