I typically charge $8-14per sq ft. Depending on how bad the lippage.
Sometimes bad lippage needs some pregrinding on edges so pads aren't flying across the room taking out a glass sliding door.
Also with travertine all the fill comes out & needs to be extracted with high pressure, filled & ground.
Typically
$1 per sq ft each stage following...
$1.-move out & back furniture, take pictures first"
Make sure to reinforce around door casings
$1.- pre-grind
$3-4 grind & level metal bond 36grit
$1. -75grit metal,
$2?-epoxy fill depend on how much needed
$1.- 100 metal,
$1- 220 resin,
$1.- 400,
$2.- polish,
$1.- seal
At $14 per sq ft the results are far better than any installation possible. Flat as concrete and just as easy to clean. You can see the grout but you can't feel it.
I have a case study of one on my web site
Partners, I will be bidding a residential job for lippage on marble floor. Any suggestions on procedures would be helpful. Machines we have are Hawk 17” and 20”. Also pricing ideas would be helpful. Thank you for any input. Have a great weekend.
Best Regards,
Richard Middleton
Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com
Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com