Have you tried industrial strength hydrogen peroxide?

Kindly,

Greg Cook
Surface Solutions inc.
808.298.3090

Follow us on Instagram - surfaceshawaii1
www.surfaceshawaii.com


On Nov 2, 2016, at 10:24 AM, Ryan Tonnemacher <ryan@beyondstonesolutions.com> wrote:

Thank you John!

 

Thank you, we appreciate your business!

 

Ryan Tonnemacher

(602) 993-9800 Office

(480) 459-5773 Fax

2039 E. Cedar St. #104

Tempe, AZ 85281

Ryan@BeyondStoneSolutions.com

www.beyondstonesolutions.com

<image001.jpg>

INSTALLATION – RESTORATION – MAINTENANCE

 

From: list-manager@stoneandtilepros.simplelists.com [mailto:list-manager@stoneandtilepros.simplelists.com] On Behalf Of John Freitag
Sent: Wednesday, November 02, 2016 12:29 PM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: RE: Limestone Rust Question

 

Ryan ,

The limestone could have natural iron deposit in the stone, trying to remove it may darken the rust stain. Recommend trying to remove the stain by using DE Powder and Iron out.

Mix the iron out per instruction on package, mix with iron out with DE Powder. Apply over the stain cover with Plastic. Place holes in the plastic and allow the poultice to set for a minimum of 24 hours. Remove the poultice. If the poultice is not totally dry allow to dry un-covered until dried. After dried remove poultice if stain is gone you have success. If the stain is lighter in color re-apply poultice. If stain darkens then you a pulling the iron from the stone and you will probably need to replace the stone.

Remember the iron out is an acid and will etch the stone. you will need to hone and polish after the poultice.

 

There is also a product called RSR 2000 from Alpha you can try to use in removing the iron stains.

 

 

John E Freitag

 

John E Freitag

Owner/Director

The Stone & Tile School

Office 407-567-7680

Cell 407-615-0134

 

 

<image002.jpg>

 

www.thestoneandtileschool.com

 

 

 

From: list-manager@stoneandtilepros.simplelists.com [mailto:list-manager@stoneandtilepros.simplelists.com] On Behalf Of Ryan Tonnemacher
Sent: Wednesday, November 02, 2016 1:52 PM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Limestone Rust Question

 

Hey guys,

 

The homeowner has a limestone floor that has flooded and now has several prominent rust stains throughout. What would you recommend for removing? We are deciding on trying to poultice them all, to using an acidic rust cleaner and then re-polishing… No idea off the table as the homeowners are almost ready to R&R. Thanks!

 

Thank you, we appreciate your business!

 

Ryan Tonnemacher

(602) 993-9800 Office

(480) 459-5773 Fax

2039 E. Cedar St. #104

Tempe, AZ 85281

Ryan@BeyondStoneSolutions.com

www.beyondstonesolutions.com

<image001.jpg>

INSTALLATION – RESTORATION – MAINTENANCE

 

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com
 
 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com
 
 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com