Now that you have figured out you can get a lift in there. I just did a job like this where they wanted to shine taken off and a honed finish. We used 120 Grit resin diamonds on 7-inch backing plates then went over everything with a 100 Grit diamond impregnated pad that we got from M3 Technologies the diamond impregnated pad removed the resin smears left by the resin diamond. I have never used dry diamonds but I guess they may work. We used water feed machines and just kept a guy on the ground with a vacuum. Very simple job to do but your arms will get a little tired from holding up the hand machine for hours on end

Then use one of the high reach scissor/platform lifts, that will work well for you

Sent from my Sprint Samsung Galaxy S7.

-------- Original message --------

From: Ron Moore <rmoore@americanstonecare.com>

Date: 1/16/17 4:53 PM (GMT-05:00)

To: sccpartners@stoneandtilepros.simplelists.com

Subject: RE: honing advice

Partners,

The lobby floor is still cement, this is early in the construction stage.
The is nothing under that we need to worry about.

Ron
On Mon, January 16, 2017 3:30 pm, Pat Staples wrote:
> Depending upon the floor in the building we can only use a single man
> lift. The bigger ones are usually too heavy to roll across the lobby
> floor
>
>
>
> Sent from my Sprint Samsung Galaxy S7.
>
>
>
> -------- Original message --------
> From: Ron Moore <rmoore@americanstonecare.com>
> Date: 1/16/17 4:23 PM (GMT-05:00)
> To: sccpartners@stoneandtilepros.simplelists.com
> Subject: honing advice
>
>
> Partners,
>
>
> We have been asked to hone approx 2,000 sf of marble, vertical, with a
> wall height of 35'. We can get a lift in, which is helpful. I would love to
> hear your suggestions regarding this challenge. Thanks in advance for your
> advice!
>
>
> Ron Moore, President
> American Stone Care, Inc.
> 16458 Lone Oak Place
> Hamilton, VA. 20158
> 540-338-5559 o
> 301-602-2307 c
> www.americanstonecare.com<http://www.americanstonecare.com>
>
>
>
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://stoneandtilepros.simplelists.com/sccpartners
>
>
> Start a new conversation (thread):
> sccpartners@stoneandtilepros.simplelists.com
>
>
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://stoneandtilepros.simplelists.com/sccpartners
>
>
> Start a new conversation (thread):
> sccpartners@stoneandtilepros.simplelists.com
>
>

Ron Moore, President
American Stone Care, Inc.
16458 Lone Oak Place
Hamilton, VA. 20158
540-338-5559 o
301-602-2307 c
www.americanstonecare.com

Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com

Visit list archives, subscribe, unsubscribe or change your subscription preferences: http://stoneandtilepros.simplelists.com/sccpartners Start a new conversation (thread): sccpartners@stoneandtilepros.simplelists.com