Using a spinner or a low moisture pressurized steam machine will work but be prepared that it will pop out more fill as the entire travertine floor is likely to have fill in it.  The customer needs to be aware of this so that you are not doing the fill job on your dime.  Filling can be very time consuming and you need to be confident that the customer will cover all of your expenses.

President
Mobile: 309.251.3192
 
 


-------- Original Message --------
Subject: Re: Cleaning travertine
From: Mike Marsoun <outerislandstonecare@gmail.com>
Date: Mon, June 05, 2017 9:25 pm
To: sccpartners@stoneandtilepros.simplelists.com


On Jun 5, 2017, at 5:36 PM, Tony Deluna <tndeluna@gmail.com> wrote:

For deep pitting on the floor after we do the hot blast, we bring in leaf blowers to blast all the water out. When you got three or four of them on the floor it works very fast

Tony DeLuna
925-625-9625

On Jun 5, 2017, at 7:45 PM, hector castillo <hectorcastillo@comcast.net> wrote:

Hell guys I would use a spinner with a good vacuum with  after the Brush for cleaning. I would then dry steam for details cleaning the use a heater to dry the floor test the floor before the cleaning for how wet it is. Then dry till it comes back to the reading you took .
I always get the bad and hard jobs. Don’t forget to seal and fix the holes , that always extra. Charge by the day for holes and repairs I like 1500.00 for holes plus supllies.
Hector Castillo
 
From: sccpartners@stoneandtilepros.simplelists.com [mailto:sccpartners@stoneandtilepros.simplelists.com] On Behalf Of Stuart Young
Sent: Monday, June 5, 2017 7:13 PM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: Cleaning travertine
 
Ron,
 
In all the years I have tried, I have never found a solution for digging the soil out of the holes in travertine. Do you think the tines of a malish brush can dig the soil out of those holes??
 
Stuart
Santa Fe Floor Care
On Jun 5, 2017, at 5:09 PM, Ron Moore <rmoore@americanstonecare.com> wrote:
 
Mark,
 
Travertine, extremely dirty. A malish brush and neutral cleaner would do wonders on this floor. Best of luck.
 
Ron
 
On Mon, Jun 5, 2017 at 5:57 PM, mark winslow <mwinslow1960@gmail.com> wrote:
Looking for feedback guy sent me pictures said the scratch is from glass that has been drug across a marble floor? Is this marble or travertine?


Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com





Sent from my iPhone
 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com
 

 

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com
 
 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com


 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com


 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com