 |
Virus-free. www.avg.com |
Thanks Stu. Maybe we can touch base on the phone tomorrow.B________________________________________ From the desk ofBaird StandishManaging PartnerFacility Specialists, LLCPhone: 215-732-7505Fax: 215-546-9160We started using Fila -chip a few years ago-the master kit has 19 colors- solids and translucent s. We have been able to do some awesome repairs using this kit. The UV light can only penetrate 1/8" into a repair so if your repairs are deeper than that you would need to fill twice with fila chip or fill partially with a different product and top it off with the fila chip.What I see on your table -I would cut the surface aggressively(you could cut it dry)-but i see some oxidation which you may want to try and remove first.You may be able to sand/grind down the edge profile to remove some chips.The larger or deeper ones you can use any product your comfortable using.Are you going to hone or polish this table.I would guess they want it honed.If that is a large pock by the corner you could fill using polyester mixed with grout. Make a form around the repair and place some small stainless screws. Then mix unsanded snow white grout into the polyester which you can add colors to.That will have to cure overnight and then following the profile sand it down to match the contour of the table.On Sat, Jan 6, 2018 at 9:29 AM, Baird Standish <bairdstandish@gmail.com> wrote:Thanks Fred
BOn Sat, Jan 6, 2018 at 9:24 AM Fred Hueston <fhueston@gmail.com> wrote:Ive done it both ways...but for a perfect repair I would fill firstOn Sat, Jan 6, 2018 at 9:12 AM, Baird Standish <bairdstandish@gmail.com> wrote:Hi. I just sent away for the deluxe filla chip kit. I am working on an old marble bakers table with some serious acid etched rings and edge chips. Wondering what the process is compared to epoxys. My typical method would be to clean the counter, fill with epoxy, then home and polish. But maybe with the whole UV light thing I should fill at the end (?)Thanks muchStay warm.Baird--________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
15 West Highland Ave. Suite E
Philadelphia, PA 19118
Phone: 215-732-7505
Fax: 215-546-9160
www.facspecs.comVisit list archives, subscribe, unsubscribe or change your subscription preferences: http://stoneandtilepros.simplelists.com/sccpartners Start a new conversation (thread): sccpartners@stoneandtilepros.simplelists.com --Frederick M. Hueston
www.stoneforensics.comoffice 321 514 6845Stone Inspection and Troubleshooting seminar Jan 29-Feb 1, 2018 Las Vegas
For more details see the training section at www.stoneforensics.comcheck out the Stone and Tile Radio Show at http://www.blogtalkradio.com/drfred Visit list archives, subscribe, unsubscribe or change your subscription preferences: http://stoneandtilepros.simplelists.com/sccpartners Start a new conversation (thread): sccpartners@stoneandtilepros.simplelists.com --________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
15 West Highland Ave. Suite E
Philadelphia, PA 19118
Phone: 215-732-7505
Fax: 215-546-9160
www.facspecs.comVisit list archives, subscribe, unsubscribe or change your subscription preferences: http://stoneandtilepros.simplelists.com/sccpartners Start a new conversation (thread): sccpartners@stoneandtilepros.simplelists.com --Visit list archives, subscribe, unsubscribe or change your subscription preferences: http://stoneandtilepros.simplelists.com/sccpartners Start a new conversation (thread): sccpartners@stoneandtilepros.simplelists.com Visit list archives, subscribe, unsubscribe or change your subscription preferences: http://stoneandtilepros.simplelists.com/sccpartners Start a new conversation (thread): sccpartners@stoneandtilepros.simplelists.com
