Hector,

Husqvarna makes a product called GM3000 Grouting System designed specifically for this application. I would check it out to see if it might work for your project.

Good luck,

Bob

 

Bob Murrell

Director of Operations

SCC/M3 Technologies Inc.

Cell-865-607-0957

Office-800-342-4533

bmurrell@m3techinc.com

www.m3techinc.com

Skype-robert.murrell8

 

M3 Logo maroon grey cutout 2 in

 

From: sccpartners@stoneandtilepros.simplelists.com [mailto:sccpartners@stoneandtilepros.simplelists.com] On Behalf Of hectorcastillo
Sent: Wednesday, January 10, 2018 1:51 AM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: Cement floor

 

Here is some photos

 

 

 

Sent from my Verizon, Samsung Galaxy smartphone

 

-------- Original message --------

From: hector castillo <hectorcastillo@comcast.net>

Date: 1/9/18 10:48 PM (GMT-08:00)

To: sccpartners@stoneandtilepros.simplelists.com

Subject: Cement floor

 

Hello Partners

I did a cement floor and it pitted when I was grinding.

Cleaned out the holes filled it with a tec. Topping coat for the holes.

Did more grinding the next day still pitted but not as bad.

Used the gm3000 and the pitted open up at the very end of the 800 grit.

What is a goodway to fill  the holes?

Hector Castillo

 
Visit list archives, subscribe, unsubscribe or change your subscription 
preferences:
http://stoneandtilepros.simplelists.com/sccpartners
 
Start a new conversation (thread): 
sccpartners@stoneandtilepros.simplelists.com