I’m in bakersfield 100 miles north of Los Angelesh

Thank You
KenPistoresi
Ken.pistoresi@icloud.com

On Aug 21, 2018, at 6:36 PM, hector castillo <hectorcastillo@comcast.net> wrote:

I am 4hrs away also. Where are you?

 

Hector Castillo

 

From: sccpartners@stoneandtilepros.simplelists.com [mailto:sccpartners@stoneandtilepros.simplelists.com] On Behalf Of Ken Pistoresi
Sent: Tuesday, August 21, 2018 2:17 PM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: limestone

 

Hello all are any of you in the San Francisco Bay area. I got a call from a general contractor  that had a limestone floor installed he needs lippage removed and a honed finish 1100 sq ft. I’m four hours away. If interested my cell is 661-8098588

Ken Pistoresi

 

From: sccpartners@stoneandtilepros.simplelists.com <sccpartners@stoneandtilepros.simplelists.com>
Sent: Friday, August 17, 2018 7:46 PM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: Thassos white marble

 

Do you have a high speed machine ?? After polish compound ,Last step I run 6000 and the 12000 dip's on a 1500 rpm ,and that will achieve that clear glass polish you are looking for. It doesn't take long and is the wow factor

 

Best Regards

Scott Wilson

Sent from my iPad


On Aug 17, 2018, at 9:06 AM, Fred Hueston <fhueston@gmail.com> wrote:

I have found that you have to use quality diamonds. Such as the Alphas. Bring up to a higher grit and avoid high acid polishes

 

On Fri, Aug 17, 2018 at 11:27 AM, <csantospago@gmail.com> wrote:

Hello all,

Just curious if anybody has some good techniques to bring back Thassos 100%.
I am kind of OCD and has always bothered me that I can never get it perfect like factory finish. We go up to 1800 and then MB22 and also Dia-glo as a final wet to dry buff.
Can usually get it good and acceptable to the client but to me it still has that slight cloudiness.
I spent several months doing post construction punchlist items (mostly marble floors and vanity tops) in this building in Boston. 157 units and they all have Thassos on the shower walls. They only asked me to do a few repairs on those but I noticed many areas they didn’t. The building is only about 50% sold so I am sure potential buyers will notice and I want to be prepared.
Walls are tough enough especially Thassos.
Anybody have any secrets?

Thank you,
Chris Santospago
Restoration by Design Stone


Sent from my iPhone

Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com



 

--

Frederick M. Hueston
www.stoneforensics.com

office             321 514 6845      

Stone Inspection and Troubleshooting seminar January 21-24,2019 Las Vegas, NV
For more details see the training section at 
www.stoneforensics.com

check out the Stone and Tile Radio Show at http://www.blogtalkradio.com/drfred  Airs every Wednesday at 6pm EST

 

 

 


Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com


Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com


Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com


Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com