I put a 1.5 hp two speed on my 13 inch. I use it for small areas of lippage removal. Put a good splash guard on,  kick it up to 400 rpm and its cuts it like butter. Two or three passes over it and it flat most of the time.  I think it originally came with a 1 hp 175 rpm. Handy for those situations.

> On Jun 3, 2019, at 3:25 PM, John Freitag <jfreitag@thestoneandtileschool.com> wrote:
>
> JOE
>
> WRONG MACHINE TOO SMALL OF MOTOR
>
>
> John E Freitag
>
> Owner/President
> Elite Stone and Tile Care, Inc.
> 407-615-0134 Cell
> 407-567-7660
>
> jfreitag@elitestoneandtilecare.com
>
> www.elitestoneandtilecare.com
>
>
>
>
>
>
> -----Original Message-----
> From: sccpartners@stoneandtilepros.simplelists.com [mailto:sccpartners@stoneandtilepros.simplelists.com] On Behalf Of Joseph Walsh
> Sent: Monday, June 03, 2019 3:07 PM
> To: sccpartners@stoneandtilepros.simplelists.com
> Subject: 13 inch, 3/4 hp floor scrubbing and buffing machines
>
> Good afternoon, I was wondering if anybody has had good luck and or pros and cons of 13 inch floor scrubbing machines with the .75 hp motor. I recently purchased a machine by a company called clean freak and so far it works good but after a while it gets hot to touch and puts off a I don’t know if it’s a new car Breakin smell and if that is normal.
>
> Any thoughts and opinions would be fantastic.
>
> Joe
> Remedy Surface Care
>
> Sent from my iPhone
>
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://stoneandtilepros.simplelists.com/sccpartners
>
> Start a new conversation (thread):
> sccpartners@stoneandtilepros.simplelists.com
>
>
>
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://stoneandtilepros.simplelists.com/sccpartners
>
> Start a new conversation (thread):
> sccpartners@stoneandtilepros.simplelists.com
>