Small office about 150 or so. A fabricator and my #1 referral. Thanks
----- Original Message -----
From: "J. Palacio" <flooramor@aim.com>
To: "Restoration and Maintenance" <sccpartners@stoneandtilepros.com>
Sent: Thursday, May 13, 2010 6:01 PM
Subject: RE: [sccpartners] MIxed stone

> Stephen,
>
> Did one recently that had gone over 20 years without restoration. When
> doing the demo/test I noticed that the white was more scratched than  the
> black and I needed a lower grit to restore the white, and in order  to get
> the depth of color on the black I had to go up to an 800 grit.  So
> basically in my case from 50, all the way up to 800 and then  polish. You
> may not have to go so low on the grits, depends on the  damage to the
> floor. How many sq ft?
>
> Test an area.
>
> Have Fun,
>
> J. Palacio
> www.flooramor.com
> 954-347-8545
>
> On May 13, 2010, at 11:43 PM, Stephen Webb wrote:
>
>> Going to polish a small office of a friend that has black and white
>> marble 12X12 checker pattern, any advice would very appreciated.  Thank
>> you
>> Stephen Webb
>> 280-7387
>> www.newlifemarblerestoration.com
>> --
>> Powered by http://DiscussThis.com
>> Visit list archives, subscribe, unsubscribe or change your  subscription
>> preferences:
>> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
>> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>
>