Re: [sccpartners] Asbestos tile restoration Baird Standish 14 Jul 2010 21:07 EDT

Thanks Kris. What kind of stripper should I use in order to maintain the color?  It doesn't appear to have much finish on it in the main walkway. But there probably is some residual coating.
Baird

_________________
From Baird Standish
Managing Partner
Facility Specialists,LLC
1616 Walnut Street
Philadelphia, PA 19103
Ph: 215-732-7505
Fx: 215-740-6436

On Jul 14, 2010, at 5:03 PM, Kris Dougherty <kris@marblefloorsandmore.com> wrote:

> When working with asbestos tile there are a few things you have to watch for.
> One the color will start to fade if you use todays stripper and it will be very hard to get this color back once it is gone.
> Two the law is you can not dry buff this floor bare. The asbestos can not be airborne so it must have a finish or be kept wet.
> Three most of the time a deep scrub and a spray buff then recoat will be the most you can do on this type of floor.
> Kris
>
> Baird Standish wrote:
>> Yes.
>>
>>
>> On Tuesday, July 13, 2010,  <flooramor@aim.com> wrote:
>>
>>> Is it 9" tile?
>>> -----Original Message-----
>>> From: Baird Standish <bairdstandish@gmail.com>
>>> Date: Tue, 13 Jul 2010 11:17:27
>>> To: Restoration and Maintenance<sccpartners@stoneandtilepros.com>
>>> Reply-To:"Restoration and Maintenance" <sccpartners@stoneandtilepros.com>
>>> Subject: [sccpartners] Asbestos tile restoration
>>>
>>> HI,
>>> We are looking involved with a project that has some old tile that the owner believes is asbestos tile.  The floor is probably more than 50 years ole and looks like it has held up pretty well.  I know that Vinyl Asbestos Tile is the precursor to Vinyl Composite tile.  VCT just doesn't hold up that well over many years typically, but this stuff looks to be in good shape.   The whole project is a restoration project involving tile, marble and wood, so they would like to retain it if possible (and perhaps save some bucks).  Anyone out there have experience with restoring this stuff.  I was thinking of cleaning and color enhancing perhaps or coating with polymer.  Am planning on doing a test at some point this week.
>>> b
>>> --
>>> Powered by http://DiscussThis.com
>>> Visit list archives, subscribe, unsubscribe or change your subscription preferences:
>>> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
>>> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>>>
>>>
>>> --
>>> Powered by http://DiscussThis.com
>>> Visit list archives, subscribe, unsubscribe or change your subscription preferences:
>>> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
>>> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>>>
>>>
>>>
>>
>>
>
> --
> Marble Floors And More
> Kris Dougherty
> 3304 N Lindbergh Blvd.
> Saint Ann, MO 63074
> Cell - 314.503.3062
> Fax - 314.298.1227
>
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>