Part of the problem with the Makita is most technicians want to put pressure
on the machine to make it cut. The diamond are made to cut the pressure
applied to the machine only places a strain on the machine thus heating it
up or in some cases the technician hold his hand over the air vents and
restricts the air flow and causes the heat up. Don't take this wrong the
machine will get warm but, I have seen these machines get so hot you cannot
hold them. Let the diamond do the work, you will find the equipment and you
technician will last much longer.
John E. Freitag
President/Director
The Stone and Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com
www.thestoneandtileschool.com
-----Original Message-----
From: Mike Marsoun [mailto:nulifesc@bigpond.com]
Sent: Monday, July 19, 2010 7:39 PM
To: Restoration and Maintenance
Subject: RE: [sccpartners] Planetary Tool for counter tops?
The Milwalkee does not have the speed control (it will slow down under
pressure) like the Makita, especially at low speeds, but it will not heat
up. Much better for polishing wet to dry or using 7" tools. The Makita is
better for diamond sanding with 5" pads.
-----Original Message-----
From: Baird Standish [mailto:bairdstandish@gmail.com]
Sent: Tuesday, July 20, 2010 8:38 AM
To: Restoration and Maintenance
Subject: RE: [sccpartners] Planetary Tool for counter tops?
Just got the Milwaukee 2.5 horsepower grinder. It is a lot heavier
than the makita and it might get tiring to use all day, but it just
kicks for heavy duty grinding. We have a project with old sandstone
floors that need 80 years of gook removed. I set up the Milwaukee with
a 7" 50 grit electroplate disc and it just goes through it like
butter. The Makita takes a lot more work. Not a Makita replacement,
but a nice thing to have for extra oomph.
B
On Wednesday, July 7, 2010, <srsdenver@gmail.com> wrote:
> W also have the 3 disc attachment and use it with a Milwaukee. The
Milwaukee does not heat up like the Mikita and it goes all day. I just did a
similar marble candy tops and was able to blow right through them. The
Milwaukee was the key. Sent via BlackBerry by AT&TFrom: Baird Standish
<bairdstandish@gmail.com>
> Date: Wed, 7 Jul 2010 17:46:27 -0400To: Restoration and
Maintenance<sccpartners@stoneandtilepros.com>ReplyTo: "Restoration and
Maintenance" <sccpartners@stoneandtilepros.com>
> Subject: [sccpartners] Planetary Tool for counter tops?
> Hi, We are starting a job grinding, honing and polishing some old marble
tables (large areas), and was curious if anyone has much experience or
comment about going with one of those flex or intertool planetary head
honing/polishing machines. I typically just use makitas with appropriate
heads and also have one of those aluminum three socket heads that goes onto
a makita. Am thinking it is just as easy to go with 7" electroplated discs.
These are old marble tables that were used to make candy, and they will
continue to make candy with them, so they don't have to look like church
alters, just ding free with a satin or semi-gloss finish.
> Thanks.Baird
>
> --
> ________________________________________
> From the desk of
> Baird Standish
> Managing Partner
> Facility Specialists, LLC
> 1616 Walnut St.
> Philadelphia, PA 19103
> Phone: 215-732-7505
> Fax: 215-546-9160
>
>
> Powered by http://DiscussThis.com <http://www.discussthis.com>
>
>
> Visit list archives, subscribe, unsubscribe or change your subscription
preferences
> <http://www.discussthis.com/members/sccpartners@stoneandtilepros.com>
>
> Start a new conversation (thread) <sccpartners@stoneandtilepros.com>
>
>
>
> Powered by http://DiscussThis.com <http://www.discussthis.com>
>
>
> Visit list archives, subscribe, unsubscribe or change your subscription
preferences
> <http://www.discussthis.com/members/sccpartners@stoneandtilepros.com>
>
> Start a new conversation (thread) <sccpartners@stoneandtilepros.com>
>
>
--
________________________________________
>From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
1616 Walnut St.
Philadelphia, PA 19103
Phone: 215-732-7505
Fax: 215-546-9160
--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com
--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com
