No I don't, its been 3 weeks ago when we diamond honed the floor and finished with 600 grit powder honing. We cleaned the grout with our turbo back then  but now there are only inserts that customer wants to polish, not entire floor so I am looking for fast and easy way to do that without spending too much time cleaning.
Adam Bartos
BiO Tile.
Sent via BlackBerry from T-Mobile

-----Original Message-----
From: "J. Palacio" <flooramor@aim.com>
Date: Mon, 8 Nov 2010 21:56:40
To: Restoration and Maintenance<sccpartners@stoneandtilepros.com>
Reply-To:"Restoration and Maintenance" <sccpartners@stoneandtilepros.com>
Subject: RE: [sccpartners] polishing travertine inserts with black grout

Hey,

What I am talking about is Grout Perfect color sealing. Since it is
sanded grout, it should be a perfect candidate. You would be color
sealing the grout. John Freitag is the trainer on this now. He should
be able to chime in tomorrow and offer more tips or insight.

How big is the area? When you say that you cleaned it very well was
this after polishing?

You don't happen to have a picture of this floor do you?

Joy,

J. Palacio
www.flooramor.com
954-347-8545

On Nov 8, 2010, at 9:43 PM, info@restoreyourtiles.com wrote:

> This is sanded grout and  I cleaned very well but it became gray
> when dried.
> What do you think about color enhancer sealer?
> Sent via BlackBerry from T-Mobile
>
> -----Original Message-----
> From: "J. Palacio" <flooramor@aim.com>
> Date: Mon, 8 Nov 2010 19:00:39
> To: Restoration and Maintenance<sccpartners@stoneandtilepros.com>
> Reply-To:"Restoration and Maintenance" <sccpartners@stoneandtilepros.com
> >
> Subject: RE: [sccpartners] polishing travertine inserts with black
> grout
>
> Hey Adam,
>
> Just some suggestions;
> 1. Don't let the polishing powder dry on the grout.
> 2. May have to color seal the grout in the end. Is it sanded or
> unsanded grout?
>
> Respectfully,
>
> J. Palacio
> www.flooramor.com
> 954-347-8545
>
> On Nov 7, 2010, at 3:34 PM, Info Info wrote:
>
>> Partners,
>> One of my customers asked me to polish honed, thumbled travertine
>> mosaic inserts. We powder honed her floor 3 weeks ago and now she
>> wants to
>> add a little accent to the floor. The problem is with the black grout
>> between those 1"x1" tiles that make up those inserts - it takes so
>> much time
>> to get them looking good and match grout with the rest of the floor.
>>
>> Is there a way to polish them with out messing the grout?
>> Adam Bartos
>> BiO Tile
>> 773-575-5515
>>
>> --
>> Powered by http://DiscussThis.com
>> Visit list archives, subscribe, unsubscribe or change your
>> subscription preferences:
>> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
>> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>>
>
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your
> subscription preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your
> subscription preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>

--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com