If you would go thru stone and tile school you would know to use stripper degreaser.

Thank you Vincent Pezzano

On Dec 18, 2010, at 5:03 PM, Kris Dougherty <kris@marblefloorsandmore.com> wrote:

> I am going to natural polish about 5000 sqft of waxed terrazzo. Do I need to strip off the old finish with wax stripper or can I use a diamond to remove the finish.
> All comments are welcome.
> Kris
>
> On 12/16/2010 12:25 PM, John Freitag wrote:
>> Tony,
>>
>> I somewhat confused, perhaps I missed and email. This terrazzo floor was
>> ground at a 30 grit ???
>> What are they trying to remove are there stains in the terrazzo that need to
>> be removed??
>> Do you have any pictures you can send??
>>
>> If the terrazzo has no stains in it and the floors have been stripped then
>> hone the floor from a 30 up to a hone that can be polished. If there are
>> stains in the floor I need additional information, are these iron, stains ,
>> stains from glues stains for something else. Once we know this information I
>> can give you more advise.
>>
>>
>> John E. Freitag
>> President/Director
>> The Stone and Tile School
>> Office 407-567-7652
>> Cell 407-615-0134
>> jfreitag@thestoneandtileschool.com
>>
>>
>>
>> www.thestoneandtileschool.com
>>
>>
>>
>> -----Original Message-----
>> From: Excel Master Floor Care [mailto:excelmasterfloorcare@cox.net]
>> Sent: Wednesday, July 21, 2010 12:34 PM
>> To: Restoration and Maintenance
>> Subject: [sccpartners] Terrazzo
>>
>>
>> Hi John,
>>
>> A company I have done work with is the one working on the Terrazzo floor.
>> They asked for my advice.  They have stripped the floor and I had suggested
>> the poultice but I wanted to make sure that I had given them the correct
>> advice.  Not sure why they used 30 grit.  Thanks for your help.
>>
>> Tony
>> Sent from my iPad
>
> --
> Marble Floors And More
> Kris Dougherty
> 3304 N Lindbergh Blvd.
> Saint Ann, MO 63074
> Cell - 314.503.3062
> Fax - 314.298.1227
>
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>