Mike,

I think I would look at using the stripper and add some honing powders. Also
try using a brush to remove it. If the tile is etched for the slip resist,
then the sodium silicate is probably into the anti- slip pore of the tile.
This could be tough to remove.

John E. Freitag
President/Director
The Stone and Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com

www.thestoneandtileschool.com

-----Original Message-----
From: Mike Marsoun [mailto:nulifesc@bigpond.com]
Sent: Monday, June 13, 2011 10:48 PM
To: Restoration and Maintenance
Subject: [sccpartners] Sunshine Coast-20110614-00128.jpg

A complex that wanted waterproofinng of the grout. So someone came and
mopped on a sodium siliconate sealer and it left this residue. I did samples
with a stripper and black pad, weighted machine and it worked fine, but
these balconies, it is thicker and not working. It is glazed ceramic with a
non slip (glazed in glass bead) surface.
Sent via BlackBerryR from Telstra
--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com