We are now trying to remove Glaze n Seal 2000 from exterior slate and we've
tried a lot of different strippers. The Glaze n Seal stripper has worked the
best. Unfortunately we didn't know what was used for original seal until
well into the process. Today's the first day we've used it but it looks
pretty good.
Good Luck!
Paula Gibbs
GrouTech
----- Original Message -----
From: <zev@stonerestorationplus.com>
To: "Restoration and Maintenance" <sccpartners@stoneandtilepros.com>
Sent: Thursday, January 22, 2009 3:58 PM
Subject: RE: [sccpartners] Color enhancer sealer

> It was applied with a sprayer when the grout was still wet. If I use
> acetone or a heavy duty alkaline stripper will that remove the shine.
>
> On 1/22/09, Marble Maestro <777-7797@videotron.ca> wrote:
>> Yes it does, tremendously
>>
>> I use Stone Tech here in Montreal.
>>
>> Is there any way you can get step by step instructions of what was done?
>>
>> Who was the original applicator?  Can you find out how it was cleaned,
>> how
>> the sealer was applied, include time frame as well.
>>
>> This product will not remove with acetone, but if it is the solvent based
>> one it will cut back with lacquer thinner.  But I may agree with Zev and
>> the
>> use of a honing powder.
>>
>> Try to give me the maximum amount of information, but nothing stops you
>> from
>> doing a few tests as was suggested.  Any of these may solve the issue as
>> all
>> have been used and all have worked due to so many other factors.  Ex- You
>> may have a very light film on it and then the acetone may work etc etc
>> etc!
>>
>>
>>
>>
>> Anthony Masecchia
>> Master Stone Consultant
>>
>> www.777-7797.com
>>
>> -----Original Message-----
>> From: stonerestorationplus@gmail.com
>> [mailto:stonerestorationplus@gmail.com]
>> On Behalf Of zev@stonerestorationplus.com
>> Sent: January 22, 2009 6:13 PM
>> To: Restoration and Maintenance
>> Subject: RE: [sccpartners] Color enhancer sealer
>>
>> Hi I went down to look at the floor and some of the tiles looked like
>> they were polished. The color enhancer that they used was from
>> STONE TECH PROFFESIONAL RICH COLOR ENHANCER SEALER. I hope this
>> helps.
>>
>> On 1/22/09, Marble Maestro <777-7797@videotron.ca> wrote:
>>> Both are great suggestions.
>>>
>>>
>>>
>>> Without knowing what product it is, its difficult to be exact.
>>>
>>>
>>>
>>> I would be interested to know which it is.
>>>
>>>
>>>
>>> Some of the sealers such as SIM from Lithofin, you can reapply some
>>> sealer
>>> on the surface, allow it to work its way in, agitate it with a red pad
>>> and
>>> remove it as you would as if you had just sealed it.
>>>
>>>
>>>
>>> Every Impregnator has a different way to apply and to "remove", you have
>> to
>>> find the ones you are comfortable with.  Color enhancing especially is
>>> not
>>> a
>>> natural process and not as easy to do as they let you think.
>>>
>>>
>>>
>>> Anthony Masecchia
>>>
>>> Master Stone Consultant
>>>
>>>
>>>
>>> Marble Maestro tm
>>>
>>> 6615 Papineau
>>>
>>> Montreal Quebec
>>>
>>> H2G 2X3
>>>
>>> 514-777-7797
>>>
>>> 514-904-1815
>>>
>>>
>>>
>>> www.777-7797.com
>>>
>>>
>>>
>>>   _____
>>>
>>> From: rivera.gm@gmail.com [mailto:rivera.gm@gmail.com] On Behalf Of
>> Georgia
>>> Rivera
>>> Sent: January 22, 2009 3:45 PM
>>> To: Restoration and Maintenance
>>> Subject: RE: [sccpartners] Color enhancer sealer
>>>
>>>
>>>
>>> I have used acetone and a pad to remove color enhancer.  It won't change
>>> the
>>> finish but you might have to reseal afterward with an impregnating
>>> sealer.
>>>
>>> On Thu, Jan 22, 2009 at 2:35 PM, rod medel <rodsuperiorstone@yahoo.com>
>>> wrote:
>>>
>>>
>>> Honing powder.... grit will depend on the finish i would do a 220 or 400
>>> mb's powder is awesome.I have just found doing the stripper,cleaner the
>>> masking just isn't worth it when you are going to have to use honing
>> powder
>>> when done anyway.
>>>
>>> --- On Thu, 1/22/09, Zev Guez <zev@stonerestorationplus.com> wrote:
>>>
>>> From: Zev Guez <zev@stonerestorationplus.com>
>>> Subject: [sccpartners] Color enhancer sealer
>>> To: "Restoration and Maintenance" <sccpartners@stoneandtilepros.com>
>>> Date: Thursday, January 22, 2009, 8:17 AM
>>>
>>>
>>>
>>> Hi I am going today to look at a honed jerusalem gold limestone that was
>>> color enhanced and the customer said that in some areas there is a
>>> builup
>>> and residue. What would be the best way to remove it .
>>>
>>> --
>>> Zev Guez
>>> Stone Restoration Plus
>>> (732) 309-3878
>>> www.stonerestorationplus.com <http://www.stonerestorationplus.com/>
>>>
>>>
>>>
>>
>>
>>
>> --
>> Powered by http://DiscussThis.com
>> Visit list archives, subscribe, unsubscribe or change your subscription
>> preferences:
>> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
>> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>>
>>
>>
>>
>
>
> --
> Zev Guez
> Stone Restoration Plus
> (732) 309-3878
> www.stonerestorationplus.com
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>