Re: [sccpartners] Terrazzo restoration CJ Crow 21 Apr 2012 17:51 EDT
Thank you very much guys. You guys are life... Job savers! Hope I have some valuable insight to contribute soon. C.J. Crow Stone Maintenance Inc. In HIS grip Sent form my iPhone On Apr 21, 2012, at 1:34 PM, "John Freitag" <jfreitag@thestoneandtileschool.com> wrote: > CJ, > > When doing terrazzo floors first determine the damage you need to remove. If > the floor has already been polished before you can probably start with a 220 > then 400 and polish unless it is a dark color terrazzo then go to 800. This > will remove the light scratches and traffic patterns. > > If the stone has never been polished and always waxed or coated then I would > recommend starting at 50 or 120 resin based upon the floor. it the floor > feel rough the marble chips bring higher than the cement base then you will > probably need to start with a 50 grit. If the damage from stripping and > waxing has not damage the cement base then you could probably start with a > 120. My recommendation is always first TEST. > > You are new to the business and testing is always best when your new. If the > customer ask why you want to demo and based upon the work needed to be > completed and you want the customer to see the results they can expect. > There is nothing wrong with asking to do a demo. This does 2 things , first > you can test the areas second it give the customer a look at what the > results will be and makes selling the job easier. > > > John E Freitag > Director > The Stone & Tile School > Office 407-567-7652 > Cell 407-615-0134 > jfreitag@thestoneandtileschool.com > > > > www.thestoneandtileschool.com > > > -----Original Message----- > From: Randy Frye [mailto:rfrye@comcast.net] > Sent: Friday, April 20, 2012 5:14 AM > To: Restoration and Maintenance > Subject: RE: [sccpartners] Terrazzo restoration > > I treat the terrazzo you described like natural stone, I use the same > process. I know some contract use a densifier at a certain point. > On Apr 20, 2012, at 2:39 AM, CJ Crow wrote: > >> I have been working on marble and travertine a lot, but I'm running into > my first few terrazzo jobs. I was hoping someone would have time to remind > me of the best process for honing and polishing terrazzo that has been honed > before. I know at least one of these jobs was installed prior to1992 so prob > concrete based, but I would appreciate both methods if they differ. >> >> Sorry for the obvious fairly new guy question. Thanks and I hope business > is going well for everyone! >> >> C.J. Crow >> Stone Maintenance Inc. >> In HIS grip >> Sent form my iPhone >> -- >> Powered by http://DiscussThis.com >> Visit list archives, subscribe, unsubscribe or change your subscription > preferences: >> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com >> Start a new conversation (thread): sccpartners@stoneandtilepros.com >> >> >> > > > -- > Powered by http://DiscussThis.com > Visit list archives, subscribe, unsubscribe or change your subscription > preferences: > http://www.discussthis.com/members/sccpartners@stoneandtilepros.com > Start a new conversation (thread): sccpartners@stoneandtilepros.com > > > > > > > > -- > Powered by http://DiscussThis.com > Visit list archives, subscribe, unsubscribe or change your subscription preferences: > http://www.discussthis.com/members/sccpartners@stoneandtilepros.com > Start a new conversation (thread): sccpartners@stoneandtilepros.com > > >