Re: [sccpartners] Grind, hone, on limestone? J. Palacio 23 Jul 2012 22:35 EDT

2 words.

Walk

Away

On Jul 23, 2012, at 10:22 PM, Freddie DeJesus wrote:

> Hello partners,
>
>    I wanted to get your opinions on grinding and honing on a limestone
> floor that the sub-structure is wire lath on top of plywood. The
> limestone
> is chipping because of defection on the floor. The sub-structure was
> not
> reinforced properly before the installation of the limestone. This
> limestone is very porous and I worry that when grinding and honing,
> the limestone will absorb the water into the plywood, and cause
> problems
> such as warping. Anyone ever have any problems with this? I know to
> keep
> the water to a minimum, but its limestone, its like honing a sponge.
>
> --
> Wilfredo DeJesus
> 561-350-3076
> Elite Flooring Inc.
> Website / www.eliteflooringandrefinishing.com
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your
> subscription preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>