Re: [sccpartners] Concrete polishing. K. Hudson 06 Jun 2013 21:25 EDT

Thank you all for your great advise! However,since I am not currently professionally trained in polishing concrete I am considering passing this job on! With that in mind who do you all recommend I contact for training on concrete polishing? Thanks!

Kevin
N-Motion Stone and Tile

Sent from my iPhone

On Jun 6, 2013, at 8:51 PM, "John Freitag" <jfreitag@thestoneandtileschool.com> wrote:

> Kevin
> If the concrete had been finished properly the honing and polishing is easy.
> Purchase some concrete diamonds . if the concrete is a good pour and smooth
> good cream finish then you can probably start with a 100 grit or 220 grit
> diamond, then after the200 grit diamond add you densfilier I prefer to allow
> the densflier to penetrate into the concrete for at least 1 hour. vac up any
> excess materials.
> Then I prefer to use a finish mop and mop on a very thin thin coat of the
> densflier and allow to set over night. Then come back the next day and hone
> 400 , 800, 1500 , 3000 and you should have a great polish.
>
>
> John E Freitag
> Director
> The Stone & Tile School
> Office 407-567-7652
> Cell 407-615-0134
> jfreitag@thestoneandtileschool.com
>
>
>
> www.thestoneandtileschool.com
>
>
>
>
> -----Original Message-----
> From: N-Motion Stone and Tile Care
> [mailto:klhudson@atlantastoneandtilecare.com]
> Sent: Sunday, June 02, 2013 11:13 PM
> To: Stone and Tile PROS Technical Support
> Subject: [sccpartners] Concrete polishing.
>
> Partners,
> I have been asked to polish 450 sq ft of concrete in a customer basement.
> The concrete has been down since October of 2012. I am looking for advise
> from those of you who have expertise in this area. Any advise would be
> greatly appreciated. Thanks!
>
> Kevin Hudson
> N-Motion Stone and Tile
>
> Sent from my iPhone
>
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>
>
>
>
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>