(Previous discussion continued)
|
||
RE: [sccpartners] Concrete polishing. John Freitag (06 Jun 2013 22:40 EDT)
|
RE: [sccpartners] Concrete polishing. John Freitag 06 Jun 2013 22:40 EDT
Kevin , If you want basic concrete polishing training only I can train you on the basics. Call me before you pass on this job John E Freitag Director The Stone & Tile School Office 407-567-7652 Cell 407-615-0134 jfreitag@thestoneandtileschool.com www.thestoneandtileschool.com -----Original Message----- From: K. Hudson [mailto:klhudson16@comcast.net] Sent: Thursday, June 06, 2013 9:25 PM To: Stone and Tile PROS Technical Support Subject: RE: [sccpartners] Concrete polishing. Thank you all for your great advise! However,since I am not currently professionally trained in polishing concrete I am considering passing this job on! With that in mind who do you all recommend I contact for training on concrete polishing? Thanks! Kevin N-Motion Stone and Tile Sent from my iPhone On Jun 6, 2013, at 8:51 PM, "John Freitag" <jfreitag@thestoneandtileschool.com> wrote: > Kevin > If the concrete had been finished properly the honing and polishing is easy. > Purchase some concrete diamonds . if the concrete is a good pour and > smooth good cream finish then you can probably start with a 100 grit > or 220 grit diamond, then after the200 grit diamond add you densfilier > I prefer to allow the densflier to penetrate into the concrete for at > least 1 hour. vac up any excess materials. > Then I prefer to use a finish mop and mop on a very thin thin coat of > the densflier and allow to set over night. Then come back the next day > and hone > 400 , 800, 1500 , 3000 and you should have a great polish. > > > John E Freitag > Director > The Stone & Tile School > Office 407-567-7652 > Cell 407-615-0134 > jfreitag@thestoneandtileschool.com > > > > www.thestoneandtileschool.com > > > > > -----Original Message----- > From: N-Motion Stone and Tile Care > [mailto:klhudson@atlantastoneandtilecare.com] > Sent: Sunday, June 02, 2013 11:13 PM > To: Stone and Tile PROS Technical Support > Subject: [sccpartners] Concrete polishing. > > Partners, > I have been asked to polish 450 sq ft of concrete in a customer basement. > The concrete has been down since October of 2012. I am looking for > advise from those of you who have expertise in this area. Any advise > would be greatly appreciated. Thanks! > > Kevin Hudson > N-Motion Stone and Tile > > Sent from my iPhone > > > -- > Powered by http://DiscussThis.com > Visit list archives, subscribe, unsubscribe or change your > subscription > preferences: > http://www.discussthis.com/members/sccpartners@stoneandtilepros.com > Start a new conversation (thread): sccpartners@stoneandtilepros.com > > > > > > > > -- > Powered by http://DiscussThis.com > Visit list archives, subscribe, unsubscribe or change your subscription preferences: > http://www.discussthis.com/members/sccpartners@stoneandtilepros.com > Start a new conversation (thread): sccpartners@stoneandtilepros.com > > > -- Powered by http://DiscussThis.com Visit list archives, subscribe, unsubscribe or change your subscription preferences: http://www.discussthis.com/members/sccpartners@stoneandtilepros.com Start a new conversation (thread): sccpartners@stoneandtilepros.com