Partners

A flooring store that I do work for has called me on a exterior granite job. Customer complained that the exterior granite is yellowing. After further inspection I am almost certain that it's a epoxy treated slab, witch would explain the yellowing. The dead giveaway is that only the top is discolored and not the edge/profile.

So far I have sampled a top polish and a hone at 320 with no change. Wondering if anybody has dealt with this before and if so, how deep did u have to cut. Waiting for a tenex response from a local vendor.

Thx

Ace

Sent from my iPhone

On Aug 14, 2013, at 8:00 AM, "Hector Castillo" <hectorcastillo@comcast.net> wrote:

> If  you leave a sealer dry on any floor you will get a sealer haze.
> I always buff the floor or countertop after sealing it.
> I don't know who or how they did the work.
> If there is a problem I have not seen it.
>
> That's why I like the information here!
>
> I have not used it lately cost to much here.
>
> Ok I would like to know who is using what sealer, and why?
>
> Hector Castillo
>
>
>
>
> -----Original Message-----
> From: John Freitag [mailto:jfreitag@thestoneandtileschool.com]
> Sent: Wednesday, August 14, 2013 6:17 AM
> To: Stone and Tile PROS Technical Support
> Subject: RE: [sccpartners] Never used DuPont Bulletprood
>
> Hector,
> I have in many cases removed the film left behind from DuPont Bulletproof
> sealer. Once you seal a floor you can take an alkaline based stripper and
> remove the film/ haze left behind.
> I had a project at Orlando international Airport where Bulletpoof was used
> and they had problems and the seal had to be stripped off. Dupont own
> Chemist when pressured in a discussion will admit it leaves a film on the
> stone surface.
>
> I've used many different sealer and prefer the sealer from StoneCare
> Central. I know the manufacturer of the sealer and used it under differ
> named labels.
>
>
> John E Freitag
> Director
> The Stone & Tile School
> Office 407-567-7652
> Cell 407-615-0134
> jfreitag@thestoneandtileschool.com
>
>
>
> www.thestoneandtileschool.com
>
>
>
> -----Original Message-----
> From: Hector Castillo [mailto:hectorcastillo@comcast.net]
> Sent: Tuesday, August 13, 2013 7:31 PM
> To: Stone and Tile PROS Technical Support
> Subject: RE: [sccpartners] Never used DuPont Bulletprood
>
> I have used it, I like it, cost about 190.00 a gallon here.
>
> It dries fast, have not seen a sealer haze.
>
>
> Hector Castillo
>
>
>
>
> -----Original Message-----
> From: Perfect Marble 2 [mailto:dayron.padilla13@gmail.com]
> Sent: Tuesday, August 13, 2013 10:41 AM
> To: Stone and Tile PROS Technical Support
> Subject: [sccpartners] Never used DuPont Bulletprood
>
> Hey gang, looking for some input on this product pros and cons.  Specs have
> this product for project we are bidding
>
> Sent by iPhone
> Dayron Padilla
> Perfect Marble
>
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>
>
>
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>
>
> --
> Powered by http://DiscussThis.com
> Visit list archives, subscribe, unsubscribe or change your subscription preferences:
> http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
> Start a new conversation (thread): sccpartners@stoneandtilepros.com
>
>
>