First, you need to deep clean the stone. Suggest cleaning with an alkaline
based cleaner using hot water. Allow to dwell for 5 to 10 minutes ,then
scrub. Then I would use Oxi-clean hot water mix it 2 to 3 scoops to 5 gallon
of hot water apply onto the floor allow to dwell on floor for to 5 to 10
minutes. The scrub, if you have a spinner tool use it for the final clean.
Once the floor is clean then I use Tenax travertine fill and find it's the
best  match. You may need to add some color. the Tenax is a polyester fill.

There is a product you can but that is called traver-full from VMC that is a
powder that you can use that works well to fill Sauturnia with . this
product set with very quick short pot life.

I've seem some use a non - sanded grout with a latex additive. This will
work on a non - polished stone.
Anyone of these will work you can decide what you want to use.

John E Freitag
Director
The Stone & Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com

www.thestoneandtileschool.com

-----Original Message-----
From: Perfect Marble 2 [mailto:dayron.padilla13@gmail.com]
Sent: Friday, August 23, 2013 11:03 PM
To: Stone and Tile PROS Technical Support
Subject: [sccpartners] Epoxy or polyester

What would you go with sauturnia elevator full of holes