RE: [sccpartners] Cultured Marble restoration John Freitag 06 Feb 2014 15:18 EST

Be careful on culture marble, if you get too aggressive you can cut through
the gel-coating and you could be the owner of a culture marble countertop.

Dry pad 1500 to 2000 , also have had good luck with Mcquires car rubbing
compound and Mcquires paste car wax to finish.

John E Freitag
Director
The Stone & Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com

www.thestoneandtileschool.com

-----Original Message-----
From: Hector Castillo [mailto:hectorcastillo@comcast.net]
Sent: Tuesday, February 04, 2014 12:59 PM
To: Stone and Tile PROS Technical Support
Subject: RE: [sccpartners] Cultured Marble restoration

They make special pads for the cultured marble I have posted them before I
think.

I will try and look for the information.

Hector castillo

-----Original Message-----
From: Stuart Young [mailto:santafefc@sbcglobal.net]
Sent: Tuesday, February 04, 2014 9:10 AM
To: Stone and Tile PROS Technical Support
Subject: [sccpartners] Cultured Marble restoration

Reading through the archives, it looks like you need to be careful when
trying to restore cultured marble and probably should not use the stone
refinishing tools we already have (flex pads, honing powders, monkey pads,
etc)

We have never done one before, but we will likely have a job coming up that
will require it.  I saw some suggestions about using car refinishing
products and some suggested particular specialty products.  Keeping in mind
that we haven't done this before and probably will have only occasional
opportunities to do it in the future, what suggestions would you have?

Thank you,
Stuart
--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com

--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com