Chris,

Allow the poultice longer time to dry. Normally you would only have a
poultice 1/4 thick when you fill the hole the poultice becomes 1 to 1 1/2
inches thick and will take much to dry. This could take 48 hours or more to
dry.  Also how wet did you make your poultice? It should be the consistence
of peanut butter or a pancake batter no wetter or it will take a longer time
to dry and could enlarge the wet areas until it start to dry.

John E Freitag
Director
The Stone & Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com

www.thestoneandtileschool.com

-----Original Message-----
From: Chris [mailto:csantospago@gmail.com]
Sent: Friday, April 25, 2014 9:52 AM
To: Stone and Tile PROS Technical Support
Subject: [sccpartners] Poultice enlarged the stain

I applied a mineral spirits and DE poultice to a plumbers putty stain in a
faucet hole and the stain got bigger. I did wet the stain before applying
the poultice. Any recommendations?
The material is Calcutta gold polished marble

Sent from my iPhone
--
Powered by http://DiscussThis.com
Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://www.discussthis.com/members/sccpartners@stoneandtilepros.com
Start a new conversation (thread): sccpartners@stoneandtilepros.com