Hi gang. Here is an interesting problem. I have a large 6x4 or so travertine table that was dropped by some movers and some areas were cracked all the way through. Repairing it is probably not a big deal-the pieces will probably glue back pretty easily. But the problem is lifting the table out of the table (it is about 300 lbs) without it all falling apart. I am thinking about getting suction cups and lifting it so that the whole thing is balanced over the edge, with a blanket in place to protect the wood, and then gluing and clamping the pieces back. The underside of the tabletop is covered so I can't push it up from below. I tried lifting with my fingers but it's not moving. Wondered if anyone has any other ideas.
Thanks.
B

________________________________________
From the desk of
Baird Standish
Managing Partner
Facility Specialists, LLC
15 West Highland Ave. Suite E
Philadelphia, PA 19118
Phone: 215-732-7505
Fax: 215-546-9160
www.facspecs.com