Slate and porcelain Justin Cameron (10 Jun 2016 19:22 EDT)
Re: Slate and porcelain stuart rosen (10 Jun 2016 20:14 EDT)
RE: Slate and porcelain John Freitag (11 Jun 2016 10:29 EDT)
Re: Slate and porcelain Justin Cameron (11 Jun 2016 11:58 EDT)
RE: Slate and porcelain John Freitag (11 Jun 2016 14:06 EDT)
Re: Slate and porcelain Justin Cameron (11 Jun 2016 14:10 EDT)

RE: Slate and porcelain John Freitag 11 Jun 2016 14:06 EDT

Masonry cleaner  surclean 600

John E Freitag

John E Freitag
Owner/Director
The Stone & Tile School
Office 407-567-7680
Cell 407-615-0134

www.thestoneandtileschool.com

-----Original Message-----
From: list-manager@stoneandtilepros.simplelists.com [mailto:list-manager@stoneandtilepros.simplelists.com] On Behalf Of Justin Cameron
Sent: Saturday, June 11, 2016 11:58 AM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: Slate and porcelain

Thank you Stu and John for the feed back. I was looking up prosco masonry cleaner and noticed a few options any specific one John?
Thank you

Sent from my iPhone

> On Jun 11, 2016, at 7:29 AM, John Freitag <jfreitag@thestoneandtileschool.com> wrote:
>
> Your going to need to use an acid based cleaner. I would recommend
> Prosco Masonry Clea John E Freitag
>
> John E Freitag
> Owner/Director
> The Stone & Tile School
> Office 407-567-7680
> Cell 407-615-0134
>
>
>
>
> www.thestoneandtileschool.com
>
> ner  600 dilute more than recommended , be sure to wear safety glasses and rubber gloves. Apply with a sponge do not spray.
> Allow dwell time with a scraper , then brush vac rinse , this will probably take two applications , after the acid then clean with a neutral cleaner to neutralize the surface. This will work on the porcelain and the slate. If the slate need  more attention you can use a honing powder or honing pad to remove the remainder and give a new honed surface to the slate. When completed seal with an impregnating sealer or to enhance the color use a color enhancing sealer , solvent based.
>
>
>
> -----Original Message-----
> From: list-manager@stoneandtilepros.simplelists.com
> [mailto:list-manager@stoneandtilepros.simplelists.com] On Behalf Of
> Justin Cameron
> Sent: Friday, June 10, 2016 7:22 PM
> To: Stone Tile Pros
> Subject: Slate and porcelain
>
> Wanting some suggestions on restoring this water feature in a spa. 🙀😬. The walls are porcelain and the bottom ledge is slate. All are really bad hard water damage wondering best way to restore or is it waste of time.
> Thanks
> Justin
>
>
> Visit list archives, subscribe, unsubscribe or change your
> subscription
> preferences:
> http://stoneandtilepros.simplelists.com/sccpartners
>
> Start a new conversation (thread):
> sccpartners@stoneandtilepros.simplelists.com
>
>
>
>
> Visit list archives, subscribe, unsubscribe or change your
> subscription
> preferences:
> http://stoneandtilepros.simplelists.com/sccpartners
>
> Start a new conversation (thread):
> sccpartners@stoneandtilepros.simplelists.com
>

Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com