Fill the hole with traver-fil from VMC,. This product is a powder that is
actually made to fill holes ion travertine. It will match the factory fills.
You add water and fill holes, allow to cure 24 hours and clean off any haze
left on the stone. fill the holes using a grout float. This is not grout.
Don't treat it like grout, only mix up what you can use in 5 minutes. It
cure quickly.

John E Freitag

John E Freitag
Owner/Director
The Stone & Tile School
Office 407-567-7680
Cell 407-615-0134

www.thestoneandtileschool.com

-----Original Message-----
From: sccpartners@stoneandtilepros.simplelists.com
[mailto:sccpartners@stoneandtilepros.simplelists.com] On Behalf Of Mike
Alston
Sent: Monday, February 13, 2017 12:13 PM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Travertine shower

Afternoon again, customer has a travertine shower floor with lots of wholes
he wants filled in. The shower floor will eventually get wet and I don't
want the filled while to reopen. Any suggestions, thanks.

Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com