Carrera high shine polish Tony Deluna (07 May 2018 20:58 EDT)
|
Re: Carrera high shine polish
Justin Cameron
(07 May 2018 21:03 EDT)
|
Re: Carrera high shine polish
Stuart Rosen
(07 May 2018 21:19 EDT)
|
Re: Carrera high shine polish
Bob Murrell
(07 May 2018 21:20 EDT)
|
Re: Carrera high shine polish
Kevin L. Hudson
(08 May 2018 06:48 EDT)
|
Re: Carrera high shine polish
Ace Siler
(08 May 2018 10:46 EDT)
|
Re: Carrera high shine polish
Mike Marsoun
(09 May 2018 14:06 EDT)
|
Re: Carrera high shine polish
Tony Deluna
(10 May 2018 00:24 EDT)
|
Re: Carrera high shine polish
Tony Deluna
(08 May 2018 16:43 EDT)
|
Carrera high shine polish Tony Deluna 07 May 2018 20:58 EDT
Hey Guys, what compound do you use to produce a high shine polish on Carrera marble? I’ve done it many times but for some reason it’s not been working too well lately. After 800 I tried 5x, Dai-glo, Tenax, Pinnacle, Revive by Aquamix, the old mb-12 from 14yrs ago, mb-20, I even took it to 3000 then the resin buff pad. But I had a couple bad spots and made it worse by using compound in a small spot. Very little too just for a test. It turned orange peel and got dull. Fortunately it’s a small table someone dropped off. What do you think guys? Tony DeLuna 925-625-9625 www.PatriotStoneRestoration.com