13 inch, 3/4 hp floor scrubbing and buffing machines Joseph Walsh (03 Jun 2019 15:07 EDT)
RE: 13 inch, 3/4 hp floor scrubbing and buffing machines John Freitag (03 Jun 2019 15:25 EDT)
Re: 13 inch, 3/4 hp floor scrubbing and buffing machines Stuart Rosen (04 Jun 2019 20:24 EDT)

RE: 13 inch, 3/4 hp floor scrubbing and buffing machines John Freitag 03 Jun 2019 15:25 EDT

JOE

WRONG MACHINE TOO SMALL OF MOTOR

John E Freitag

Owner/President
Elite Stone and Tile Care, Inc.
407-615-0134 Cell
407-567-7660

jfreitag@elitestoneandtilecare.com

www.elitestoneandtilecare.com

-----Original Message-----
From: sccpartners@stoneandtilepros.simplelists.com [mailto:sccpartners@stoneandtilepros.simplelists.com] On Behalf Of Joseph Walsh
Sent: Monday, June 03, 2019 3:07 PM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: 13 inch, 3/4 hp floor scrubbing and buffing machines

Good afternoon, I was wondering if anybody has had good luck and or pros and cons of 13 inch floor scrubbing machines with the .75 hp motor. I recently purchased a machine by a company called clean freak and so far it works good but after a while it gets hot to touch and puts off a I don’t know if it’s a new car Breakin smell and if that is normal.

Any thoughts and opinions would be fantastic.

Joe
Remedy Surface Care

Sent from my iPhone

Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com