Dayron,

When removing tack strips split the wood away from the tack strip using a
chisel or screw drive. Then use an angle grinder with a metal blade and cut
off the nail flush to the floor. the small remaining nail will not be seen
and there will be no hole in the floor to repair. if you use any type of
tool to try and remove the tack strip and the nail you will have Holes
From 1/4 inch to 3 inch depending upon how well the nail was fastened.

John E Freitag
Director
The Stone & Tile School
Office 407-567-7652
Cell 407-615-0134
jfreitag@thestoneandtileschool.com

www.thestoneandtileschool.com

-----Original Message-----
From: list-manager@stoneandtilepros.simplelists.com
[mailto:list-manager@stoneandtilepros.simplelists.com] On Behalf Of Dayron
Sent: Monday, July 14, 2014 1:33 PM
To: Stone and Tile PROS Technical Support
Subject: Terrazo with carpet strips

Have this Terrazo project to do but it has the carpet strips.  Is there a
way to get these out with out making the holes when I take out nails

Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com