Thanks gentlemen.

Sent from my iPhone

> On Oct 22, 2014, at 9:33 AM, "John Freitag" <jfreitag@thestoneandtileschool.com> wrote:
>
> Chris,m
>
> First and most important test the coating on the surface to see what it
> going to take to remove the finish. Depending who coated these floors there
> could be a urethane or acyclic finish on the tiles.
> If there is an acrylic coating an alkaline based stripper will remove the
> finish, if it a coating then you will need to secure a stripper to remove
> the urethane. Caution there could be both type of coating on this floor.
> Test several areas to see what is needed to remove the coating. It will
> probably take several stripping to remove all the coating. Plan plenty of
> time to remove the finish.
>
>
> John E Freitag
> President/Owner
> The Stone & Tile School
> 407-567-7652
> 407-615-0314
> jfreitag@thestoneandtileschool.com
>
>
> www.thestoneandtileschool.com
>
>
>
>
> -----Original Message-----
> From: list-manager@stoneandtilepros.simplelists.com
> [mailto:list-manager@stoneandtilepros.simplelists.com] On Behalf Of Chris
> Sent: Tuesday, October 21, 2014 3:39 PM
> To: Sccpartners Email Support
> Subject: Terra Cotta floor restoration
>
> I have a client with a terra-cotta floor in a 4 season sunroom that was
> installed about 25 years ago. It looks as though it was waxed at the time
> and definitely needs to be stripped and redone.
> It would be my first time working with terra-cotta so i'm looking for advice
> here.
>
> Thanks
> Chris Santospago
> Restoration by Design Stone
> 978-609-1061
>
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://stoneandtilepros.simplelists.com/sccpartners
>
> Start a new conversation (thread):
> sccpartners@stoneandtilepros.simplelists.com
>
>
>
>
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://stoneandtilepros.simplelists.com/sccpartners
>
> Start a new conversation (thread):
> sccpartners@stoneandtilepros.simplelists.com
>