Any photos?
Hector Castillo

-----Original Message-----
From: list-manager@stoneandtilepros.simplelists.com
[mailto:list-manager@stoneandtilepros.simplelists.com] On Behalf Of Mike M
Sent: Thursday, January 14, 2016 12:48 AM
To: sccpartners@stoneandtilepros.simplelists.com
Subject: Re: Granite polish

What about Tenax pectro? Or a paste wax. Or tenax Cera.

> On 14 Jan 2016, at 4:19 pm, Tony Deluna <tndeluna@gmail.com> wrote:
>
> Hi Kevin,
> I will have to look for the pic. I ground it level with a 100 grit, 3"
lippage metal bond pad. Then 5" 220 resin, color matched and epoxy filled
the seam. 220 the seam then 400,800,1500,3000 then mb8 on a felt pad. I got
the shine back but too much micro phishers.
> I got all the compound scrubed out then used Ager color enhancer to darken
the phishers but it was so shiny you could see them all.
> I'll look for pics.
> Thanks
>
> Tony DeLuna
> 925-625-9625
> www.PatriotStoneRestoration.com
>
>> On Jan 13, 2016, at 7:39 PM, N-Motion Stone and Tile Care
<klhudson@atlantastoneandtilecare.com> wrote:
>>
>> Tony what process did you use, what polishing compound did you use and do
you have a pic? I had a similar situation where I used to much polishing
compound and it was trapped in the stone causing a similar effect. I had to
clean the granite using alkaline base cleaner and a medium grit brush. A
picture may help offer a solution!
>>
>> Kevin L. Hudson
>> N-Motion Stone and Tile
>> (678) 662-0110
>>
>>> On Jan 13, 2016, at 7:11 PM, Tony Deluna <tndeluna@gmail.com> wrote:
>>>
>>> Hello Pros,
>>> I had a granite countertop I polished about six months ago. It was
installed uneven at the seam. I was hired to grind it level & polish it out.
I ground it down level and perfectly  even but my problem came when I tried
to finish the polish. I ended up with too many micro phishers. Those tiny
little spider web cracks. The polish came out good and it was just as shiny
but too many micro phishers. It was obvious.
>>> I came back with a tenax product called micro phisher remover which did
nothing then a wax I was told by a granite fabricator that would work that
did nothing. I also tried this watery clear 2 part epoxy that we use on
concrete that didn't stick. I applied it at 100 grit. It just flaked off as
I got higher in diamond grit.
>>> The customer calls me back periodically to ask if I have found the
solution yet.
>>> I do a test now with a disclaimer or ask for a remnant piece to do a
test first before grinding & polishing granite. It's got me spooked now.
Since then I had to walk away from a counter top polish that did the same. I
guess I been lucky for years till now.
>>> Any ideas?
>>>
>>> Tony DeLuna
>>> 925-625-9625
>>> www.PatriotStoneRestoration.com
>>> Visit list archives, subscribe, unsubscribe or change your subscription
>>> preferences:
>>> http://stoneandtilepros.simplelists.com/sccpartners
>>>
>>> Start a new conversation (thread):
>>> sccpartners@stoneandtilepros.simplelists.com
>>
>> Visit list archives, subscribe, unsubscribe or change your subscription
>> preferences:
>> http://stoneandtilepros.simplelists.com/sccpartners
>>
>> Start a new conversation (thread):
>> sccpartners@stoneandtilepros.simplelists.com
>>
>
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://stoneandtilepros.simplelists.com/sccpartners
>
> Start a new conversation (thread):
> sccpartners@stoneandtilepros.simplelists.com
>

Visit list archives, subscribe, unsubscribe or change your subscription
preferences:
http://stoneandtilepros.simplelists.com/sccpartners

Start a new conversation (thread):
sccpartners@stoneandtilepros.simplelists.com