honing advice Ron Moore (16 Jan 2017 16:23 EST)
RE: honing advice Pat Staples (16 Jan 2017 16:31 EST)
RE: honing advice Ron Moore (16 Jan 2017 16:53 EST)
RE: honing advice Pat Staples (16 Jan 2017 18:07 EST)
RE: honing advice Pat Staples (16 Jan 2017 20:16 EST)
RE: honing advice Ron Moore (17 Jan 2017 08:52 EST)
Re: honing advice stuart rosen (17 Jan 2017 09:02 EST)
Re: honing advice Ron Moore (17 Jan 2017 09:24 EST)
RE: honing advice Pat Staples (17 Jan 2017 09:36 EST)
Re: honing advice Ron Moore (17 Jan 2017 09:28 EST)
RE: honing advice Pat Staples (17 Jan 2017 09:50 EST)
RE: honing advice Ron Moore (18 Jan 2017 15:37 EST)
Re: honing advice stuart rosen (17 Jan 2017 11:01 EST)
Re: honing advice Ron Moore (18 Jan 2017 15:40 EST)
Re: honing advice stuart rosen (18 Jan 2017 21:16 EST)
RE: honing advice Ron Moore (17 Jan 2017 08:48 EST)

RE: honing advice Ron Moore 17 Jan 2017 08:48 EST

Was wondering tools and technique?
On Mon, January 16, 2017 5:07 pm, Pat Staples wrote:
> Then use one of the high reach scissor/platform  lifts, that will work
> well for you
>
>
>
> Sent from my Sprint Samsung Galaxy S7.
>
>
>
> -------- Original message --------
> From: Ron Moore <rmoore@americanstonecare.com>
> Date: 1/16/17 4:53 PM (GMT-05:00)
> To: sccpartners@stoneandtilepros.simplelists.com
> Subject: RE: honing advice
>
>
> Partners,
>
>
> The lobby floor is still cement, this is early in the construction stage.
>  The is nothing under that we need to worry about.
>
>
> Ron
> On Mon, January 16, 2017 3:30 pm, Pat Staples wrote:
>
>> Depending upon the floor in the building we can only use a single man
>> lift. The bigger ones are usually too heavy to roll across the lobby
>> floor
>>
>>
>>
>> Sent from my Sprint Samsung Galaxy S7.
>>
>>
>>
>>
>> -------- Original message --------
>> From: Ron Moore <rmoore@americanstonecare.com>
>> Date: 1/16/17 4:23 PM (GMT-05:00)
>> To: sccpartners@stoneandtilepros.simplelists.com
>> Subject: honing advice
>>
>>
>>
>> Partners,
>>
>>
>>
>> We have been asked to hone approx 2,000 sf of marble, vertical, with a
>> wall height of 35'. We can get a lift in, which is helpful. I would love
>> to hear your suggestions regarding this challenge. Thanks in advance for
>> your advice!
>>
>>
>> Ron Moore, President
>> American Stone Care, Inc.
>> 16458 Lone Oak Place
>> Hamilton, VA. 20158
>> 540-338-5559 o
>> 301-602-2307 c
>> www.americanstonecare.com<http://www.americanstonecare.com<http://www.am
>> ericanstonecare.com<http://www.americanstonecare.com>>
>>
>>
>>
>>
>> Visit list archives, subscribe, unsubscribe or change your subscription
>>  preferences:
>> http://stoneandtilepros.simplelists.com/sccpartners
>>
>>
>>
>> Start a new conversation (thread):
>> sccpartners@stoneandtilepros.simplelists.com
>>
>>
>> Visit list archives, subscribe, unsubscribe or change your subscription
>>  preferences:
>> http://stoneandtilepros.simplelists.com/sccpartners
>>
>>
>>
>> Start a new conversation (thread):
>> sccpartners@stoneandtilepros.simplelists.com
>>
>>
>
>
> Ron Moore, President
> American Stone Care, Inc.
> 16458 Lone Oak Place
> Hamilton, VA. 20158
> 540-338-5559 o
> 301-602-2307 c
> www.americanstonecare.com<http://www.americanstonecare.com>
>
>
>
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://stoneandtilepros.simplelists.com/sccpartners
>
>
> Start a new conversation (thread):
> sccpartners@stoneandtilepros.simplelists.com
>
>
> Visit list archives, subscribe, unsubscribe or change your subscription
> preferences:
> http://stoneandtilepros.simplelists.com/sccpartners
>
>
> Start a new conversation (thread):
> sccpartners@stoneandtilepros.simplelists.com
>
>

Ron Moore, President
American Stone Care, Inc.
16458 Lone Oak Place
Hamilton, VA. 20158
540-338-5559 o
301-602-2307 c
www.americanstonecare.com